Friday, August 26, 2011

Friday

The week is over and yet it feels like it has just begun. Things are a little crazy for our small family at the moment. We're waiting to hear back on some funding to see if Dad can still stay in school without getting a second job (working full-time + school full-time + baby coming this semester = lots of trouble). Waiting is so hard when money is involved. Keep us in your prayers.

This morning I got to spend time with superman while Megan had a checkup and it was great. We cleaned most of the whole house (Superman loves to swiffer, which is awesome) so that Mom had a nice surprise when she got home and then Dad played with Superman and some RC cars (see the brag blog for some fun video). He doesn't quite get the whole connection between the controllers and the cars, but he's close. I also spent some time this morning reading the Book of Mormon and The New Testament.

I read about not being provoked easily in Moroni 7:45 which prompted me to read similar words on charity and faith in the New Testament's 1 Cor 13. My anger has always been something that I have struggled with. Those of you who have known me for a while probably know this better than anyone. I feel like I've come a long way from the angry little boy in elementary school but some times I'm reminded that I haven't come far enough yet. As I lead my little family into the unknown it is easy to get angry with in-sensitivities, perceived, intended, unintended or otherwise and it is important to remember that the people I interact with are not facing the problems my family is facing and since they don't know them, they can't show appropriate "respect" or concern.

I've also been thinking a lot about what my personal identity is made out of. Am I a father, husband, son, friend, brother, employee, church member, or student? How do all these roles mix and mingle into me, Ross. Do I worry too much about being a friend? a student? In what roles am I deriving the greatest satisfaction? I went back and read through some of my Journal entries from when I was just about 19 and found a snippet that made me both smile and helped me feel the spirit because I found myself thinking similar thoughts as I jotted down notes in my journal this morning.

"I don't think I'll ever know all the why's in the world so I don't know what I'm getting to... I just wanted to write something down but that is impossible because how could I ever write enough about me that anyone could say they knew me after I'm dead? My purpose, legacy is not to be quoted, or even remembered in the history books, my legacy will be the strong people I raise in my future family."

Sunday, August 7, 2011

Quick Water table tutorial

Real quick general guideline for a water table using a bucket and scraps. This was really ad hoc, not much planning.

Materials
1 plastic self-contained container that is water proof and has a lid ~10$
1 2 x 4 ~2.50$ http://goo.gl/zhYWb
1 1 x 6 ~8.00$ http://goo.gl/3eZDk
1 scrap MDF for the bottom to add some rigidity
handful of nails, screws what have you
Wood glue, because you love it

I already had the glue, nails, screws from previous projects. I sourced all the wood from the Home Depot Scrap bin, ~50c a piece or from my hackerspaces scrap bin. All told I spent about 1.50 on wood.

Tools
Something to cut wood with, jig saw, circular saw, table saw, band saw, hand saw etc.
Drill
Hammer (if you decide to use nails)
Sand paper
Hand sander

Steps
1. Get 4 table legs, either from various scrap or use a single 2 x 4 cut into four equal parts (a little less than 2' per leg, we built it taller than he needed right now, so it will grow with him)

2. Measure around your future water container. For a snug fit I just measured with the wood, marked it, then cut it.

3. Place the water container ontop of the MDF/Rigid bottom piece and place all the side peices around it. Trace around the exterior. Cut out your trace.

4.Start putting together the side pieces, make sure they are as close to square as possible. Pre-drill if using screws as the wood is thin and you don't want it to snap. I also use a countersink bit so the screws will be flush with the surface. You can also use finish nails and tap them in so little fingers won't snag on them.

5.Once the Sides are all screwed/nailed together you will want to make sure your bin still fits. We chose (had on hand) a bin that had a tapered form so it snugly pushed into the frame I quickly made. (I nailed in one nail loose to get everything together then pre-drilled and screwed in with glue for a snug fit)

6.If the bin fits, great, time to attach legs. Remove the bin, and pre-drill from the inside of the frame into each leg. I turned the frame "upside down" so that the legs were sticking up in the air and level with the top of the frame. I used two screws per leg with glue between the frame and the 2 x 4.

7. Once your legs are attached, time to put the mdf bottom on the frame. I first attached it using screws (gently as you are close to the MDF edge) then flipped it all over and sealed up the entire inside where the MDF met the frame with wood glue.

8. I then let the glue dry a bit (I made this while packing up my workshop for a move, so had the time to wait for glue to dry)

9. After the glue was finished I used about 5 or six 60 grit pieces of sand paper and a hand sander to smooth down all the edges of the 2 x 4s and smooth out the rough cuts etc. Rounded corners hurt much less then sharp 90 degree ones.

10. If you want it to last you should seal up the wood with some poly-ureathane/acrilic what have you. I didn't have time for that and my finishing stuff was already moved so I didn't have any on hand. For what it cost, I'm not too worried if the wood warps. The biggest problem is the MDF bottem. Hmm I should seal this baby up next weekend....

Hope that helps give some direction. I don't "know" what I'm doing and if you choose to follow these directions I can't be held responsible.

Good luck,

Ross

Thursday, August 4, 2011

DIY Toddler Water Table


Our apartment complex has these great community activities including weekly water days where they pull out half a dozen kids pools and slippery slides and sprinklers and let the kids go wild. It's awesome!  One of Superman's favorite toys is the toddler water table.
So I got this idea to get him a water table to help us stay entertained and cool through the last half of the summer. But those fancy little tables cost anywhere from $30-$200 -- a bit too much for our budget. I talked to Ross and made a plan involving some scrap wood and a rubbermaid bin. Here's what we came up with for less than $10.
(What is that face?! Adorable!)
It's really just a very simple design. I would share a how-to tutorial, but well, Ross made it and I didn't think ahead to make a tutorial. Sorry, but maybe you can get a good enough idea from the pics.
And my favorite part is that when we are done, I can just snap the lid on and it's all put away until next time.
And when the hot weather is past, I plan to bring the little table inside and convert it into a sensory table like this adorable garden from Pepper Scraps.